Figure 13-15 Connecting A Multiline Terminal To An Analog Telephone Using An Ap(A)-R Unit/Ap(R)-R Unit (Example) - NEC Univerge SV8100 System Hardware Manual

Issue 1.0 UNIVERGE SV8100/SV8300
3.3 AP(A)-R Unit/AP(R)-R Unit (Port Adapter)
The AP(A)-R Unit Analog Port Adapter without Ringer or the AP(R)-R Unit
Analog Port Adapter with Ringer is used to install a Single Line Terminal,
Modem, Credit Card Reader, Wireless Headset, or other compatible analog
device.
The AP(R)-R Unit generates ringing signals and requires an AC-2R/AC-3R
Unit.
The AP(A)-R Unit or the AP(R)-R Unit can be installed on all multiline
terminals except the DTR-2DT-1.
Figure 13-15 Connecting a Multiline Terminal to an Analog Telephone using
an AP(A)-R Unit/AP(R)-R Unit (Example) illustrates how the AP(A)-R Unit/
AP(R)-R Unit is connected to the ESI(8)-U( ) ETU and to an analog
telephone.
Multiline Terminal + AP(A)-R Unit or AP(R)-R Unit
ESI
Analog
ETU
Telephone
Line Cord (2-line)
Line Cord (2-line)
Core
AC Adapter
(use only with AP(R)-R Unit)
Figure 13-15 Connecting a Multiline Terminal to an Analog Telephone using an
AP(A)-R Unit/AP(R)-R Unit (Example)
term
13 - 14 Installing D Series i Optional Equipment