Figure 4-78 Wiring Harness; Figure 4-79 19" Chassis Access Panel - NEC Univerge SV8100 System Hardware Manual

Issue 1.0
4 - 62
4. Install Ground Screw (green) securing grounding wire to
chassis (refer to
page 4-60).
5. Install power switch cable (refer to
Wiring Harness on page
6. Carefully install both plugs securing the wiring harness to the
back plane (refer to
page 4-60).
7. Plug fan power cable into three prong plug (refer to
Opening Chassis Access Panel (19" Chassis) on page
8. Reinstall access cover and secure with retaining screw (refer to
Figure 4-72 19" Chassis Access Panel on page
9. Install the fan ventilation hood and secure with screw removed
earlier.
Ensure insulation of harness is located to protect possible
damage to wiring by the ventilation hood bracket. (refer to
Figure 4-78 Wiring Harness on page
UNIVERGE SV8100/SV8300
Figure 4-75 Unplugging Wiring Harness on
Figure 4-75 Unplugging
4-60).
Figure 4-75 Unplugging Wiring Harness on
4-63).
Installing the SV8100 Chassis
Figure 4-73
4-59).
4-58).