UNIVERGE SV8100/SV8300
System Hardware Manual
9.
Install batteries into Battery Tray. Refer to
Connecting Battery
10.
Using two screws, install the Battery Tray Bracket. Refer to
Figure 4-62 Removing Battery Tray Bracket on page
Figure 4-64 Connecting Battery Cables
11.
Insert Battery Connection Cable into cable guides. Refer to
Figure 4-64 Connecting Battery Cables on page
12.
Install the Battery Tray Cover and tighten the two screws.
Refer to
Figure 4-64 Connecting Battery Cables on page
13.
Slide the Battery Trays into the CHS LARGE BATT BOX.
14.
Install the Battery Tray Suppressor while pulling the Battery
Connection Cable(s) through the cutouts provided. Refer to
Figure 4-65 Connecting Battery Cables on page
with two screws.
15.
Plug the Battery Connection Cable(s) into the Fuse Unit. Refer
to
Figure 4-65 Connecting Battery Cables on page
Cables.
Issue 1.0
Figure 4-64
4-52.
4-53.
4-53.
4-54. Secure
4-54.
4 - 53