Figure 13-18 Installing The Ferrite Core On The Ap(A)-R/Ap(R)-R Unit - NEC Univerge SV8100 System Hardware Manual

Issue 1.0
13 - 18
3. Install the ferrite core (provided with the unit) about two inches
from the line cord plug.
AP(A)-R Unit
or
AP(R)-R Unit

Figure 13-18 Installing the Ferrite Core on the AP(A)-R/AP(R)-R Unit

4. Connect the line cord to the unit, limiting the cable length from
the AP(A)/AP(R)-R Unit to the Single Line Telephone to a
maximum of 50 feet.
When only installing the AP(R)-R Unit, plug the AC Adapter (AC-2R/
AC-3R Unit) power cord into the indicated AP(R)-R Unit receptacle
and connect it to a power source. Refer to
AC Adapter to an Installed Adapter on page
5. Replace the base plate (or wall mount unit) and attach the line
cord. Refer to Section 3 Connecting a Multiline Terminal to the
System on page
UNIVERGE SV8100/SV8300
12-12.
term
Installing D Series i Optional Equipment
Figure 13-5 Connecting the
13-5.