Figure 8-5 Connecting The Base Unit - NEC Univerge SV8100 System Hardware Manual

Issue 1.0
3.3
8 - 6
Use caution when installing or modifying telephone lines.
term
To connect the D Cordless Terminal to the host telephone:
1. Unplug the telephone line cord from the host telephone, and connect it to
the LINE IN jack.
2. Using the telephone line cord supplied with the D
connect the LINE OUT jack to the host telephone jack.
Applying Power to the Base Unit
1. Plug the AC Adapter cord into the AC Adapter input jack on the Base
Unit.
Use only the AC Adapter supplied with the D
2. Plug the AC Adapter into a standard 120 Vac wall outlet.
3. Route the power cord where it does not create a trip hazard or where it
could become chafed and create a fire or other electrical hazards.
The AC Adapter furnished with this telephone can be equipped with a polarized
line plug (a plug having one blade wider than the other). This plug fits into the
power outlet only one way. When you cannot insert the plug fully into the outlet,
reverse the plug. When the plug still does not fit, contact your facilities
coordinator about replacing the obsolete plug. Do not alter the shape of the
blades of the polarized plug.
Line OUT to Host
term

Figure 8-5 Connecting the Base Unit

Installing SV8100/SV8300 Cordless Telephones
UNIVERGE SV8100/SV8300
term
Cordless Terminal,
Handset Cordless Terminal.
Line IN from
Telephone Jack