Figure 4-33 Pz-Bs10 Blade Installed; Figure 4-34 Pz-Bs10 Installed (Cover Closed) - NEC Univerge SV8100 System Hardware Manual

UNIVERGE SV8100/SV8300
System Hardware Manual
8. Align the door tabs with hinges and reattach the
cover.
9. Close the PZ-BS10 cover.

Figure 4-34 PZ-BS10 Installed (Cover Closed)

3.5.4.3 Install the PZ-BS11 Expansion Blade in the CHS2U-US
Expansion Chassis
For the Expansion Chassis to function, the PZ-BS10 blade must
be installed in Controlling Chassis.
Do not remove or install this blade with
the power on.
1. Ensure the chassis is powered down.

Figure 4-33 PZ-BS10 Blade Installed

Issue 1.0
4 - 33