Figure 5-16 Install Rubber Feet; Figure 5-17 Install Chs2U Joint Bracket Kit - NEC Univerge SV8100 System Hardware Manual

Issue 1.0
5 - 18
4. Install the five rubber feet to the bottom of the chassis.

Figure 5-16 Install Rubber Feet

5. Position the CHS1U-US and CHS2U-US chassis on top of the
CHS BASE UNIT.
6. Secure the chassis to the CHS BASE UNIT using screws
supplied with the CHS STAND KIT (K).

Figure 5-17 Install CHS2U JOINT BRACKET KIT

7. Connect the ground wire to all chassis. Refer to
19" Chassis Grounding on page 5-46
grounding the system.
UNIVERGE SV8100/SV8300
3.5.7 Install
for complete details on
Installing the SV8300 Chassis