Toro Reelmaster 3100-D Service Manual page 18

Jacking the Rear End (continued)
Safety: Safety Instructions
g341982
1. Frame
2. Rear wheel motor
1. The preferred method of lifting the rear end of the machine for removing
the rear fork or the rear wheel motor:
A. Secure a chain fall or hoist to the rear casting
B. Chock both front tires. Lift rear tire off the ground.
C. Use jack stands or hardwood blocks under the frame to support the
machine (Figure
2. If the rear of the machine can not be lifted from above
Make sure jack is as close to the rear fork as possible when jacking
the rear wheel.
A. Place jack securely under the rear wheel motor.
B. Chock both front tires. Jack rear tire off the ground.
C. Use jack stands or blocks under the frame to secure the machine.
Figure 4
3. Rear fork
4).
IMPORTANT
Page 1–8
(Figure 3).
(Figure 4):
Reelmaster ® 3100-D/3105-D
20252SL Rev A