Toro Reelmaster 3100-D Service Manual page 220

1. Hydraulic tube
2. Lock nut
3. Hydraulic T−fitting
4. Hydraulic hose
5. 90º hydraulic fitting
6. Hydraulic hose
7. Hydraulic tube
8. 90º hydraulic fitting
9. Push button switch
10. Hydraulic cylinder
11. Thrust washer
12. Hydraulic hose
13. Bulkhead nut
14. Hydraulic fitting
15. Hydraulic hose
16. Hydraulic hose
17. Hydraulic tube
18. Hydraulic tube
19. Hydraulic tube
20. Tube clamp
Removing the Rear Lift Cylinder
Hydraulic System: Service and Repairs
Figure 107 (continued)
21. Flat washer
22. Cap screw
23. Lock nut
24. Rear pivot shaft
25. Jam nut
26. Washer
27. Rear lift arm assembly
28. Flange head screw
29. Thrust washer
30. Grease fitting
31. Cutting unit pivot shaft
32. Cap screw
33. Cap screw
34. Rebound washer
35. Washer
36. Lynch pin
37. Switch bracket
38. Carriage screw
39. Nut
40. Flange nut
1. Park machine on a level surface. Lower cutting units, stop engine and
engage parking brake. Remove key from the key switch.
2. Read the General Precautions for Removing and Installing Hydraulic System
Components (page
3. To prevent contamination of hydraulic system during lift cylinder removal,
thoroughly clean exterior of cylinder and fittings.
Make sure that the cutting units are fully lowered before loosening
hydraulic lines from lift cylinders. If cutting units are not fully
lowered as hydraulic lines are loosened, cutting units may drop
unexpectedly.
Note: To ease installation, label the hydraulic hoses to show their correct
position on the lift cylinder.
4. Disconnect the hydraulic hoses from the rear lift cylinder.
5. Remove the rear lift cylinder from the frame and lift arm using
as guide.
6. If hydraulic fittings are to be removed from lift cylinder, mark fitting orientation
to allow correct assembly. Discard O−rings.
41.
42.
43.
44.
45.
46.
47.
48.
49.
50.
51.
52.
53.
54.
55.
56.
57.
58.
59.
5–62).
WARNING
Page 5–144
Lock washer
Guard
Cap screw
Cap screw
Lock nut
External retaining ring
Pin
O−ring
Hydraulic hose
Hydraulic hose
Plastic slide
Bracket
O−ring
Hydraulic hose
Hydraulic hose
Hydraulic hose
O−ring
Hydraulic hose
Flange head bolt
Figure 107
Reelmaster ® 3100-D/3105-D
20252SL Rev A