Toro Reelmaster 3100-D Service Manual page 43

Angle Indicator and Magnetic Mount
Angle Indicator: Toro Part No. 131–6828
Magnetic Mount: Toro Part No. 131–6829
Because the top grind angle on bedknives
is critical for edge retention, and therefore
after-cut appearance, Toro has develop these
service tools for accurately measuring the top
grind angle on all bedknives.
Since there can be variations in the mounting
surface of the bedbar, it is necessary to grind
the bedknife after installing it to the bedbar.
1. Place the angle indicator on the bottom side
of the bedknife with the digital display facing
you as shown.
2. Press the Alt Zero button on the angle
indicator.
3. Remove the angle indicator and place the
magnetic mount on the edge of the bedknife so
that the face of the magnet is flat against the
top angle of the bedknife.
4. Place the angle indicator on the mount with
the digital display facing you as shown. The
angle displayed on the indicator is the current
bedknife top angle.
Reelmaster ® 3100-D/3105-D
20252SL Rev A
1. Bedknife
2. Angle Indicator
1. Angle indicator surface
2. Magnetic mount
3. Bedknife
Page 2–23
g223327
Figure 9
3. Bedbar
g223326
Figure 10
4. Bedbar
5. Angle indicator
Specifications and Maintenance: Special Tools