Toro Reelmaster 3100-D Service Manual page 71

Removing the Engine
Reelmaster ® 3100-D/3105-D
20252SL Rev A
1. Park machine on a level surface, lower cutting units, stop engine, engage
parking brake and remove key from the key switch.
2. Open and remove the engine hood from the machine. Slide seat all the
way forward.
3. Disconnect the air hose from the air cleaner and radiator. Remove air cleaner
from the engine; refer to
4. Disconnect both battery cables at the battery (see
(page 6–49)).
5. Remove muffler from the exhaust manifold and muffler bracket; refer to
Removing the Exhaust System (page
If the radiator or engine is hot, pressurized hot coolant can escape
and cause burns.
Do not open the radiator cap or drain the radiator when the coolant
is hot.
• Ethylene-glycol antifreeze is poisonous.
• Keep the coolant away from children and pets.
• Keep the coolant in a labelled container.
• Discard the coolant in accordance with local hazardous waste
ordinances.
6. Drain radiator from the drain cock valve into a suitable container. Disconnect
coolant hoses from the water pump and engine block; refer to
Radiator and Oil Cooler Assembly (page
7. Remove reservoir and bracket from the top fan shroud. Remove top fan
shroud from the radiator; refer to
Assembly (page 4–12).
Removing the Air Cleaner Assembly (page
4–7).
DANGER
WARNING
4–12).
Removing the Radiator and Oil Cooler
Page 4–15
4–4).
Servicing the Battery
Removing the
Engine: Service and Repairs