Toro Reelmaster 3100-D Service Manual page 60

Removing the Air Cleaner Assembly
Engine: Service and Repairs
The air cleaner body, air filter, filter cover, and burp valve should be checked
daily, prior to operation.
Any leaks in the air cleaner system will cause serious engine
damage. Make sure that all air cleaner components are in good
condition and are properly secured during operation.
1. Park machine on a level surface, lower cutting units, stop engine, engage
parking brake and remove key from the key switch. Raise and support hood.
g342252
1. Latch
2. Dust cap
3. Burp valve
2. Release latches securing the air cleaner cover to the air cleaner body.
Separate the cover from body. Clean inside of the air cleaner cover; refer
to Figure 12.
3. Gently slide the filter out of air cleaner body to reduce the amount of dust
dislodged. Avoid knocking filter against air cleaner body.
4. Inspect filter and discard if damaged. Do not wash or reuse a damaged filter.
Do not over service the air filter element; damage may result.
5. Remove the air cleaner components as necessary; refer to
IMPORTANT
Figure 12
4. Filter element
5. Body
IMPORTANT
Page 4–4
Figure 11.
Reelmaster ® 3100-D/3105-D
20252SL Rev A