Toro Reelmaster 3100-D Service Manual page 66

Installing the Fuel Tank
Engine: Service and Repairs
1. Position fuel tank into the machine.
2. Using labels placed during fuel tank removal, connect both fuel hoses to the
tank and secure with the hose clamps and fuel hose strap; refer to
3. Connect seat switch to the electrical harness. Secure seat support straps
and seat to the frame with hex flange head screws; refer to
Seat (page 7–8).
4. Connect the negative battery cable to the negative battery post.
5. Fill the fuel tank with clean fuel; refer to Operator's Manual.
6. Prime the fuel system; refer to
7. Check the fuel hoses and fittings for leaks.
Note: Repair all fuel leaks before returning the machine to service.
8. Lower the hood and secure it with the latches.
Priming the Fuel System (page
Page 4–10
Figure 14.
Installing the
4–9).
Reelmaster ® 3100-D/3105-D
20252SL Rev A