Toro Reelmaster 3100-D Service Manual page 266

Controller Checks (continued)
Electrical System: Component Testing
5. If any of the conditions in step 3 are not met or power to terminal 1 exists and
any of the other conditions in step 4 are not met:
A. Check the continuity of the circuitry from the battery to the glow relay and
glow plugs; refer to the Electrical Schematics in
B. Check the continuity of the circuitry from the battery to key switch, glow
controller, glow lamp, glow relay, and ground; refer to the Electrical
Schematics in Appendix A (page
C. Replace the parts as necessary.
6. Connect the electrical connector to the fuel stop solenoid.
A–1).
Page 6–42
Appendix A (page A–1).
Reelmaster ® 3100-D/3105-D
20252SL Rev A