Table of Contents
Advertisement
FAX TRANSMISSION MESSAGE
4-4
How to Set the Transmission Message
If you want to send a transmission message, you must set it each time you make
a transmission.
1
In fax mode, press the FUNCTION key, then press the
"3" key.
TX MESSAGE SET
PRESS (1-6)
Instead of pressing the "3" key you can also press the left arrow key
(
) or right arrow key ( ) until this message appears and press the
ENTER key.
Press one of the keys from 1 to 6 to select a transmission
2
message.
1. CONFIDENTIAL
2. PLS. DISTRIBUTE
3. URGENT
4. PLS. CALL BACK
5. IMPORTANT
6. NO MESSAGE
Instead of using the numeric keys, you can also press the left arrow
key (
) or right arrow key ( ) until this message appears and press
the ENTER key.
Perform the sending operation.
3
The transmission message function is automatically cleared after the
fax transmission.
Even if the transmission message function is set, it is
cancelled by the following oerations.
Note
Pressing the CLEAR ALL key
Entering copy mode
Using the auto clear function (Please refer to the "User
Programs" section of the copier operation manual.)
Advertisement
Table of Contents
