Table of Contents
Advertisement
RECEIVING FAXES
To receive faxes ensure that paper is set in the paper tray. See the "LOADING COPY PAPER"
section of the copier operation manual. A4 size portrait (
Note
automatically sensed when the fax is recieved, so you do not need to supply paper in both orientations.
When changing the size of paper in the tray, first adjust the paper tray guides, then perform a paper
size setting operation. For more information, see the "LOADING COPY PAPER" section of the copier
operation manual.
The size of the paper physically present in the paper tray and the size set for that tray in the fax
machine are different, you cannot receive faxes properly. You must ensure that the paper present in
the tray is the same as the size set in the fax machine. If the paper in the tray is smaller than the size
set, received faxes will be cut off. In this case, the data that is printed is erased from memory. If the
paper present in the tray is bigger than the size set in the fax machine, misfeeds can occur. If a
misfeed occurs, the data is not erased from memory. When this happens match the paper size in the
tray with the size set in the fax machine.
You cannot print received faxes using paper set in the bypass tray.
When receiving a fax with ULTRA FINE resolution, you need one of the optional memory upgrades.
(See page 6-1)
About the Receiving Method
Fax only mode (See page 2-16)
Using the extension telephone (See page 4-6)
Converse on the
extension telephone
If you do not have an extension telephone, leave the fax machine set to automatic receiving mode.
If you have an extension telephone, you must change the connection setting to "ON" with a user
Note
program. (See page Appendix-8)
You can reserve a fax transmission while at the same time receiving a fax (dual access).
(See page 2-11)
2-14
Procedure
Automatic receiving
Faxes are automatically received.
This mode is convenient when using
a telephone line dedicated to the fax
machine, or when no one is in the
office.
Manual mode
When the phone rings, pick up the
handset, confirm that it is a fax call,
and receive the fax manually. This
mode is convenient when you have
one telephone line and receive faxes
infrequently.
To use this mode, you need an
extension telephone.
) and landscape (
) orientations are
Setting
Set the automatic receiving mode.
(See next page)
Set the manual receiving mode.
(See next page)
Advertisement
Table of Contents
