Table of Contents
Advertisement
PRINTING
The following explains activity list results.
Sending Result
OK
BUSY
CANCEL
P. FAIL
NO RESPONSE
NO RX POLL
PASSCODE # E
RX TERM FAIL
CONF TX CNCL
NO REL FUNC
REL REQ FAIL
ORIG ERROR
ERRORxx xxxx
Reception Result
OK
P. FAIL
MEM. FULL
LENGTH OVER
CONF. ERROR
CONF RX CNCL
RX POLL FAIL
RX NO POLL
REL RQ FAIL
RELAY FAILED
ERRORxx xxxx
5-2
The transmission completed successfully.
Not transmitted because the line was busy.
Cancelled during transmission or memory sending operation was cancelled.
There was a power failure during transmssion.
The phone was not answered.
When being polled
The other fax machine number has not been entered.
The fax number of the other fax machine has not been entered in your
passcode list.
When being polled
The other fax machine's system number has not been entered in your passcode list.
The system number of the other fax machine and your fax machine do not match.
When sending a confidential fax
The other fax machine does not have the confidential fax receiving function
or is not a SHARP product.
The other fax machine has only one confidential box and the passcode has
not been entered in it.
You made a mistake entering the confidential box number for the fax machine
with confidential confidential boxes.
Your fax machine number has not been entered.
When making a relay request
The other fax machine does not have the relay fax function.
The other fax is not a SHARP product.
When making a relay request
The automatic dialling number was not entered in the other fax machine.
Your fax machine number has not been entered into the other fax machine's
Relay Passcode List.
When using direct sending with the SPF, there is an original misfeed.
Because of poor line conditions, a telephone line error prevented the
transmission.
COM. ERROR number (first 2 digits): The displayed error code is from 00 to 31
COM. ERROR number (last 4 digits): Used by service personnel
The reception completed successfully.
There was a power failure during transmssion.
When using substitute reception, memory has become full.
The received original was extra long.
When receiving a confidential fax, the other fax machine entered a confidential
box number that does not exist on your fax machine.
The other fax machine number was not entered.
When polling
Your fax number has not been entered.
Your fax number has not been entered in the passcode list of the other fax machine.
Your system number is not entered in the passcode list of the other fax machine.
The system number of the other fax machine and your fax machine do not match.
When polling
The other fax machine does not have the polling function.
The original is not set in the other fax machine or has not been read into
memory.
When receiving a relay request the fax number of the requesting fax machine
has not been entered into your Relay Passcode.
When requesting fax machine created a relay group with an automatic dialling
number that does not exist on the relay station fax machine.
Because of poor line conditions, a telephone line error prevented the reception.
COM. ERROR number (first 2 digits): The displayed error code is from 00 to 31
COM. ERROR number (last 4 digits): Used by service personnel
Explanation
Explanation
Advertisement
Table of Contents
