Table of Contents
Advertisement
ENTERING AUTO DIALLING INFORMATION
This model has an easy to use auto dialling feature. Frequently used fax numbers and names can be entered and easily dialed
to send faxes.
About the display for entering auto dialling information corrections erasing
Note
R01=
ENTER FAX #
This alphanumeric code is explained in the chart below.
Character
Meaning
R
Rapid Dialling
S
Speed Dialling
Group Dialling
G
P
Program Dialling
Entering Rapid Dialling Information Corrections Erasing
By entering rapid dialling information, you can dial numbers without using numeric
keys by simply pressing a rapid key. Together with group dial numbers, you can
enter up to 35 numbers.
About the START key and ENTER key
Depending on the display you are instructed to press
Note
the START key or the ENTER key. However, instead of
pressing the ENTER key where instructed to do so, you
can also press the START key and perform the operation
correctly.
How to Enter Rapid Dialling Information
1
From fax mode press the ENTRY key.
Press the "1" key.
2
The following message is displayed.
RAPID KEY
1=SET, 2=CLEAR
Instead of pressing the "1" key you can also press the left arrow key
(
) or right arrow key ( ) until the following message appears, and
then press the ENTER key.
Number Code Meaning
Rapid Dial Number (2 digits)
Speed Dial Number (3 digits)
Group Dial Number (2 digits)
Program Dial Number (2 digits)
2-19
Advertisement
Table of Contents
