Table of Contents
Advertisement
INSTALLATION
Your machine is affected by the environment in which it is installed. Do not install your machine in the following areas.
Excessively hot, cold, humid, or dry areas (for
example, near stoves, humidifiers, or air
conditioners)
This may result in damp paper, condensation within the
internal mechanisms, misfeeds, and dirty output.
(Operating Environment: 15˚C to 30˚C, 20 to 85% relative
humidity)
Also, in ultrasonic humidifiers, use purified water. If you
use tap water, mineral residue can form on internal
components of the machine, causing poor-quality output.
Poorly ventilated areas
When copying/printing, this machine emits ozone. The
amount of ozone emitted is not harmful, however, if
performing large copying/printing jobs and the smell of
ozone becomes objectionable, open a window or use a fan
to ventilate the area.
* If you place the machine near a window, make sure it is
not exposed to direct sunlight.
ii
Dusty areas
If dust enters the internal parts of the copier, damage or
poor-quality output can result.
Areas in direct sunlight
Direct sunlight can distort the
plastic parts of the copier and
result in poor-quality output.
Areas with high concentrations of ammonia
gas
If you place the machine near another copier that emits
ammonia gas (such as one used for copying drafting
paper), poor-quality output can result.
Advertisement
Table of Contents
