Sharp AR-FX2 Operation Manual page 147

ENTERING INFORMATION AND SETTING PROGRAMS (P101-P161)
P114 RECALL TIMES (LINE ERROR) SETTING
Use program P114 to change the number of retry attempts when there is a transmission error. Initially, the number of retries is
set to 1.
When you enter P114, the following message is displayed.
P114:RECALL TIMES
(LINE ERROR)
1 Press the START key.
ENTER RECALL TIMES
1=0TIME, 2=1TIME
2 Press one of the following keys.
"1" key: 0 TIME
"2" key: 1 TIME
P115 INTERRUPT TX AT RECALL MODE SETTING
Use program P115 to control whether faxes waiting in memory will be sent when the current job cannot be sent (for example,
because of a busy signal). Initially, this program is set to "ON".
When you enter P115, the following message is displayed.
P115:INTERRUPT TX
Press the START key.
1
INTERRUPT TX
1=ON,
2 Press one of the following keys.
"1" key: ON
"2" key: OFF
P116 # OF RINGS AUTO TX SETTING
Use program P116 to set the time that elapses before an automatic transmission stops when there is no answer from the
recipient's fax. When there is no answer from the recipient within the specified time, the phone call is automatically terminated.
Initially, this program is set to 45 seconds.
When you enter P116, the following message is displayed.
P116:# OF RINGS AUTO
Press the START key.
1
2 Press one of the following keys.
"1" key: 30 seconds
"2" key: 45 seconds
"3" key: 60 seconds
AT RECALL MODE
2=OFF
TX
Appendix-11