Table of Contents
Advertisement
Press the START key.
6
After you select the time, enter the days as described in the next step.
ENTER DAY CODE(0-7)
6=SAT, 7=NO SELECTED
7
Enter the day using the numeric keys (0 to 7).
The day codes are as follows:
0: Sunday
1: Monday
2: Tuesday
3: Wednesday
When you do not want to enter a specific day, enter press the "7" key.
Instead of pressing the keys from "0" to "7", you can use the left
arrow key (
) or right arrow key ( ) to select the day and press the
ENTER key.
Press the START key.
8
SELECT COMM. MODE
PRESS (1-6)
Confirm that the time and day are set correctly and press the START
key.
Cancelling
When you make a mistake entering the time or day...
Press the CLEAR key and enter the number again.
Select the operation type (1 to 6) using the numeric
9
keys.
1. Normal sending
2. Broadcast sending
3. Confidential sending
4. Relay request
5. Polling
6. Serial polling
Instead of pressing the keys from "1" to "6", you can use the left
arrow key (
) or right arrow key ( ) to select the operation type and
press the ENTER key.
The procedures for the following operations are different. Please refer to the
pages listed.
Normal sending (See page 2-1)
Broadcast sending (See page 3-1)
Confidential sending (See page 3-7)
Relay request (See page 3-11)
Polling (See page 3-17)
Serial polling (See page 3-17)
After setting a timer operation, you can perform other
operations. However, if you want the timer operation
Note
to execute on time, make sure to finish the other
operations before the scheduled timer operation. If
another operation is in progress at the same time as
a timer operation is scheduled, the timer operation
executes when the other operation is finished.
You can print out a list of the timer operations you
have entered. For more information see page 5-3.
TIMER OPERATIONS
4: Thursday
5: Friday
6: Saturday
7: no selected
3-5
Advertisement
Table of Contents
