Table of Contents
Advertisement
HOW TO USE USER PROGRAMS
You cannot change user programs during a fax transmission or reception.
1
Select fax mode.
If the copier mode indicator is lit, press the COPY/FAX key.
2
Press and hold the light (
seconds.
The following message is displayed.
USER PROGRAM
ENTER PRG.#
3
Enter the desired user program number (3-digit) using
the numeric keys, then press the START key.
The user program numbers are listed on page Appendix-1.
Confirm the user program numbers by printing a list of them with the
user program P161 OPTIONAL SETTING LIST PRINT.
The user program number and name are displayed.
Instead of entering the user program number, you can also press the
left arrow key (
) or right arrow key ( ) to select the user program.
Cancelling
If you make a mistake entering the user program number, press the
CLEAR key and enter the number again.
) key for more than 5
=
Appendix-3
Advertisement
Table of Contents
