Selecting Fax Mode - Sharp AR-FX2 Operation Manual

TURNING POWER "ON" AND "OFF"
1-6

Selecting Fax Mode

This model has two modes: copier mode and fax mode. When the fax mode
indicator above the COPY/FAX key is lit, you can use the machine as a fax. When
the copier mode indicator is lit, you can use the machine as a copier. To change
from copier mode to fax mode, press the COPY/FAX key. Features available with
the fax function (for example automatic fax reception) are enabled even in copier
mode.
1 If the copier mode indicator is lit, press the COPY/FAX
key.
The fax mode indicator lights up.
If you are done faxing and want to enter the copier mode, press the
COPY/FAX key again to select copier mode.
If the machine is in use, you cannot change modes. If
you want to manually receive a fax or if you want to
Note
quickly enter fax mode, press the CLEAR key to
cancel copying, and press the COPY/FAX key.
After sending or receiving faxes, the machine returns
to the fax mode initial state, but does not return to the
copier mode.
Fax Mode Initial State
In the fax mode initial state, the messages similar to the following are shown on
the display. Depending on user program settings, this display may differ slightly
from yours.
Date Day Time
12 NOV FRI
STAND-BY
Fax Function Features Enabled in Copier Mode
Automatic fax reception (See page 2-14)
Timer operations (See page 3-3)
Programs that use timer operations (See page 3-25)
Memory polling (See page 3-20)
The relay station function of relay request (See page 3-11)
Sending originals in memory from memory sending mode (See page 2-6)
Remote reception (See page 4-6)
% in memory
08:30
100%