Table of Contents
Advertisement
ENTERING AUTO DIALLING INFORMATION
Press the number "1" or "2" key to set chain dialling.
8
For normal number entry, select "2 = CANCEL."
Note
If you press the "1" key and select "1 = SET" chain dial entry begins,
and you return to step 3. For more information about chain dialling,
see page 3-42.
DEFALT TX SPEED
1:33600bps
9
Select the default transmission speed using keys 1
through 4.
1: 33600bps
2: 14400bps
3: 9600bps
4: 4800bps
Instead of choosing a number, you can use the left arrow key (
right arrow key (
transmission speed.
For international dialling, if you find that line noise
necessitates a slower transmission speed, set the
Note
appropriate transmission speed. If you are not sure if a
slower speed is required, set the speed normally.
After selecting the speed, the following message is displayed.
INT.NATIO.TX
1:NO
Select the international transmission mode using keys
10
1 through 4.
1: NO
2: MODE 1
3: MODE 2
4: MODE 3
Instead of choosing a number, you can use the left arrow key (
right arrow key (
international transmission mode.
Sometimes when faxing internationally, line noise can
cause the transmission to stop momentarily. To reduce
Note
these delays, choose the appropriate international
transmission mode.
If you frequently encounter errors when faxing
inter nationally, tr y each of the international
transmission modes 1 through 3, and choose the best
mode for your line conditions.
After you have finished entering the rapid dialling information, you return to step
3. To enter more rapid dialling information, continue with steps 4 through 10.
11
After you have entered all your rapid dialling
information correctly, press the CLEAR ALL key.
) and press the ENTER key to select the
) and press the ENTER key to select the
) or
) or
2-21
Advertisement
Table of Contents
