Table of Contents
Advertisement
ENTERING INFORMATION AND SETTING PROGRAMS (P101-P161)
P123 RELAY PASSCODE SETTING
Use program P123 to create relay passcodes of fax machines that you want to allow to make relay requests to your fax
machine. Relay passcodes can only be used with certain SHARP models and contain the sender's fax number. You can
create a list of up to 10 relay passcodes. You can print out the relay passcodes you have entered.
When you enter P123, the following message is displayed.
P123:RELAY PASSCODE
1
Press the START key.
RELAY PASSCODE
1=SET,
How to Enter Relay Passcode Numbers
1
Press the "1" key.
RELAY ID #
# (01-10)
2
Enter the relay passcode number (01 to 10) using the numeric keys.
Press the START key.
3
The following message is displayed.
Example
RELAY ID #=08
FAX #=
If you enter a previously entered relay passcode number, you return to step 1.
4
Enter the sender's fax number using the numeric keys.
The phone number can be up to 20-digits long.
To input a plus (+) symbol, press the
If you make a mistake entering the number, pressing the CLEAR key erases characters one at a time. Enter the
correct number from the last character erased.
5
Press the START key.
How to Erase Relay Passcode Numbers
Press the "2" key.
1
RELAY ID #
#(01-10)
Enter the relay passcode number that you want to erase using the numeric keys.
2
3
Press the START key.
If you entered a relay passcode number that was not previously entered, you return to the initial P123 display.
2=CLEAR
=
key and to input a space, press the # key.
=
Appendix-17
Advertisement
Table of Contents
