Table of Contents
Advertisement
6
7
8
Beep
Press the START key.
The original is scanned into memory.
START:CONT.READ
#KEY:END OF SET
When scanning is finished, you can set the next page
on the original table and press the START key.
Repeat this procedure until all of the originals have been scanned.
If you want to change the original size, press the ORIGINAL SIZE
ENTER key.
After the last original has been scanned, press the #
key.
The fax machine automatically dials the number and sending begins.
Originals are sent in the order in which they were scanned.
Example
TOTAL PAGE = 02
Remove originals from the original table by opening the document
feeder cover.
If you leave the last original on original table for about one minute
without pressing the # key, the fax machine makes a "beeping" sound
and sends the fax.
When the transmission is completed, a "beep" sounds.
You can remove the original and the following message is displayed.
12 NOV FRI 10:00
STAND-BY
The recipient is dialed and the fax is sent.
When sending a fax from the original table, set the
original on the original table, close the document feeder
Note
cover, confirm that the original size is correctly set, and
send the fax.
Cancelling
To cancel a fax...
Press the CLEAR key and sending is cancelled. (See page 2-12)
SENDING FAXES
100%
2-5
Advertisement
Table of Contents
