Table of Contents
Advertisement
ENTERING AUTO DIALLING INFORMATION
2-22
Correcting Rapid Dialling Information
1
Perform steps 1 to 3 in the section "How to Enter Rapid
Dialling Information" (See page 2-19, 2-20), and
continue with step 2 in this section.
2
Press the rapid key number (01 to 35) that you want to
change.
Example
R01 STORED:CHANGE?
1=YES, 2=NO
3
Press the "1" key.
Select the "CHANGE?" option.
The display panel shows the recipient's fax number so you can change
the information.
Example
PRESS START LAST
987-654-3210
4
Enter changes to the recipient's fax number using the
numeric keys.
You can enter a maximum of 40 digits. If you need to enter a pause
between any digits of the number, press the REDIAL/PAUSE key. A
pause that you enter is displayed as a hyphen (-) character.
The pause time is set with a user program. (See page Appendix-6)
If you make a mistake entering the number, pressing the CLEAR key
repeatedly erases characters one at a time, and you can re-enter the
characters.
5
Press the START key.
After changing the fax number stored in the rapid key number, you
can change the recipient's name.
The display panel shows the recipient's name so you can change the
information.
Example
PRESS START KEY LAST
SHARP
6
Enter changes to the recipient's name using the alphabetic
character entry keys and press the START key.
You can enter a maximum of 20 characters.
For more information about entering characters, refer to the section
"HOW TO ENTER CHARACTERS". (See page 2-37)
CHAIN DIAL
1=SET, 2=CANCEL
If you do not want to correct the recipient's name, press
the ENTER key.
Note
Advertisement
Table of Contents
