Table of Contents
Advertisement
PROGRAMS
3-28
Enter the day using the numeric keys (0 to 7).
11
The day codes are as follows:
0: Sunday
1: Monday
2: Tuesday
3: Wednesday
When you do not want to enter a specific day, enter press the "7" key.
Instead of pressing the keys from "0" to "7", you can use the left
arrow key (
) or right arrow key ( ) to select the day and press the
ENTER key.
Cancelling
When you make a mistake entering the time or day...
Press the CLEAR key and continue with step 8. (See the previous page)
12
Press the START key.
SELECT COMM. MODE
PRESS (1-7)
Confirm that the time and day are set correctly and press the START
key.
The procedures for the following operations are different. Please refer to the
pages listed.
Normal sending (See the next page)
Broadcast sending (See page 3-32)
Confidential sending (See page 3-33)
Relay request (See page 3-34)
Polling (See page 3-35)
Serial polling (See page 3-36)
Memory polling (See page 3-37)
After setting a program operation, you can perform
other operations. However, if you want the program
Note
operation to execute on time, make sure to finish the
other operations before the scheduled timer operation.
If another operation is in progress at the same time
as a program operation is scheduled, the program
operation executes when the other operation is
finished.
You can print out a list of the program operations you
have entered. (See page 5-4)
4: Thursday
5: Friday
6: Saturday
7: no selected
Advertisement
Table of Contents
