Sending Faxes - Sharp AR-FX2 Operation Manual

SENDING FAXES

Beep
2-2
Dial the fax number.
5
If you make a mistake, pressing the CLEAR key erases the digits of
the number you entered one at a time.
You can also use redial to dial a number again. (See page 1-17)
PRESS START KEY
1234
6 Press the START key.
When sending an original in memory mode, the original is first
scanned into memory.
READING
The original is deposited on the exit area.
TOTAL PAGE = 02
When the transmission is completed, a "beep" sounds, and the
following message is displayed.
12 NOV FRI 09:40
STAND-BY
The recipient is dialed then the fax is sent.
Cancelling
To cancel a fax...
Press the CLEAR key and sending is cancelled. (See page 2-12)
7 The send operation is finished.
If you turn the power off or if there is a power outage
while scanning an original, the original may become
Note
jammed in the fax machine. After restoring power, refer
to the "MISFEED REMOVAL" section of the copier
operation manual.
#001
60%
60%