Table of Contents
Advertisement
ENTERING INFORMATION AND SETTING PROGRAMS (P101-P161)
P124 AUTO REDUCE TX SETTING
Use program P124 to control the automatic reduction of faxes before transmission, depending on the paper size of the receiving
fax machine. If you do not set automatic reduction and the paper size of the receiving fax machine is too small, some of the fax
image will be lost. If you use automatic reduction, the entire image will be received, but because of the reduction in size some
faxes may be difficult to read. Initially, this program is set to automatically reduce faxes if necessary.
When you enter P124, the following message is displayed.
P124:AUTO REDUCE TX
1
Press the START key.
AUTO REDUCE TX
1=REDUCE, 2=1:1
2
Enter one of the following keys.
"1" key: REDUCE
"2" key: 1:1
P125 ROTATE TX SETTING
Use program P125 to control whether the image of the original is rotated before transmission. You can set this program to
rotate the image of a landscape original to portrait orientation before transmission and vice versa. The rotation direction is
counter-clockwise. Initially, original rotation is set to "ON".
(Original orientation)
When you enter P125, the following message is displayed.
P125:ROTATE TX
Press the START key.
1
ROTATE TX
1=ON,
How to Set Original Rotation
1
Press the "1" key.
PAPER SIZE A4
1=ON,
2
Enter one of the following keys.
"1" key: A4 original rotation is performed
"2" key: A4 original rotation is not performed
How to Disable Original Rotation
Press the "2" key.
1
Appendix-18
(Transmission orientation)
2=OFF
2=OFF
Advertisement
Table of Contents
