Erasing The Tool Compensation Data - Mitsubishi Electric 700 Series Training Manual

3. Setup Screen

3.2.2 Erasing the Tool Compensation Data

Operation method (Erasing one line of tool compensation data at the cursor position)
(1) Move the cursor to the line to
be erased with the ↑ , ↓ ,
keys.
(2) Press the Line clear
menu.
(3) Press the Y
To cancel the erasing, press a key other
than Y or INPUT .
Operation method (Erasing the compensation data from compensation number 122 to 125.)
(1) Press the Line clear menu.
(2) Input the compensation number of the
data range to be erased.
122/125 INPUT
(3) Press the Y
Press a key other than
in order not to erase the data.
(Note) If the INPUT key is pressed without selecting an compensation number, the line where the
cursor is located is erased.
and
and INPUT
or INPUT key.
or INPUT key.
Y or INPUT
3.2 Tool Compensation Amount
The cursor appears at the data item of the selected
compensation No.
The menu keys are highlighted and a message displays
confirming whether it is okay to erase.
The background color of the data to be erased displays in
light blue.
The selected line of data (one line amount) is cleared to
zero.
The data erased to zero displays at the top of the
compensation data.
The menu is highlighted.
A message box displays to confirm whether it is okay to
erase the data.
The background color of the data to be erased displays in
light blue.
The compensation data for the selected compensation
number is erased, and the menu highlight returns to normal.
The data cleared to zero displays at the top of the
compensation data.
92