Formatting An External Device; List Of File Names - Mitsubishi Electric 700 Series Training Manual

6. Maintenance Screens

6.2.9 Formatting an External Device

Operation method (Formatting a memory card)
(1) Press the menu MemCrd format .
(2)
Press Y or
(Note 1) The memory card and data server are formatted with FAT32.
(Note 2) The volume label is set when the memory card is formatted.
Operation method (Formatting a DS)
First, press the menu DS format . Refer to "Formatting a memory card" for operations.
(Note 1) Only the DS formatted with FAT or FAT32 can be used. The DS with NTFS cannot be used.
(Note 2) As for the DS formatted with NTFS, reformat it with FAT or FAT32 by Windows to use.
(NC cannot convert NTFS partition to FAT or FAT32.)
(Note 3) The volume label is not set even when the DS is formatted.

6.2.10 List of File Names

There is a directory for each type of data in the NC memory.
Each directory and file name (fixed) in the NC memory is shown below.
Do not change the extensions (.XXX) when storing in a device other than the NC memory.
Data type
Machining program
Fixed cycle program
Parameters
Parameters [User, machine] (Text format)
Auxiliary axis parameter
User PLC
NC data
Tool compensation amount data
Tool life management data
Common variable data
SRAM data
System configuration data
Decryption code
Sampling data
Machine data
INPUT .
/PRG/USER
/PRG/FIX
/PRM
/LAD
/DAT
/DGN
/RLS
/LOG
/DGN
A message confirming the formatting appears.
The memory card is formatted.
A message appears when the formatting is completed.
NC memory directory path
255
6.2 Input/Output Screen
Fixed file name
(Program No.)
(Program No.)
ALL.PRM
AUXAXIS.PRM
USERPLC.LAD
TOOL.OFS
TLIFE.TLF
COMMON.VAR
SRAM.BIN
ASSEMBLY.INF
PASSCODE.DAT
NCSAMP.CSV
COMPO.STA