Mitsubishi Electric 700 Series Training Manual page 173

4. Edit Screens
Display item
(8) Currently executed
machining program
Main O10...
Sub O1234...
(9) Buffer display
Menus
Menu
This performs an operation search and a check search.
Operate
Select a program to perform a check for from the program file list
search
displayed in the pop-up window.
This checks the program continuously.
Check
continu
This checks the program per block.
Check
step
This resets the program check.
Check
reset
This erases the graphics displayed on the screen.
Erase
Each time this menu is pressed, the graphic data is erased in the
order of rapid traverse and cutting feed.
This changes the graphic drawing display range.
Press this menu to display the menu for changing the display mode.
Display
range
This changes the display range and erases the graphic data
displayed on the screen.
This changes the drawing plane.
Press this menu to display the menu for changing the display mode.
There are 3 types of graphic drawing display mode: 1-plane, 2-plane,
Display
mode
and 3-dimension.
This changes the drawing plane and erases the graphic data
displayed on the screen.
This switches the normal display mode and the full-screen display
All
display mode.
This displays the machining program being checked on the graphic
drawing area.
Program
display
This menu can be selected only when the full-screen display mode is
applied.
This changes the program check (3D) display.
(This menu does not display if the 3D solid graphic check option is
3D
disabled.)
check
This menu cannot be selected while the check is performed or
interrupted.
This sets the viewpoint angle for the 3-dimension display mode.
This changes the viewpoint angle and erases the graphic data
Rotate
displayed on the screen.
However, this menu cannot be used for other than the 3-dimension
display mode.
The display range (scale and display position) is automatically set
from the machine movable area. The machine movable area is set
Std
with the parameters " #2013 OT- " and " 2014 OT+ " (software limit).
range
When the display range is changed, the graphic data displayed on
the screen is erased.
(Note) The menu 3D check and Operate search keys cannot be selected while the check is performed or
interrupted. Menu can be selected after Check reset is pressed.
This displays the device name, program number, sequence number, and block
number currently being executed.
This displays the sub-program device name, program number, sequence number,
and block number for the sub-program currently being accessed.
This displays the contents of the machining program currently being checked.
The block being executed is highlighted.
Details
165
4.3 Program Check (2D)
Details
Type
C 4.3.1 Checking
Continuously
B
B 4.3.2 Checking One
Block at a Time
C 4.3.3 Cancelling the
Program Check
C
C 4.3.5 Changing the
Display Range
C 4.3.6 Changing the
Display Mode
B 4.3.8 Switching to Full-
screen Display Mode
B
C 4.4 Program Check (3D)
C 4.3.7 Changing the
Display Angle
C
Reference