All Backup Screen - Mitsubishi Electric 700 Series Training Manual

6. Maintenance Screen

6.3 All Backup Screen

This screen is used to perform batch backups of NC memory data to an external device, and batch restoration
of that data to the NC memory.
Data backed up by the automatic backup function can also be restored.
Data which has been automatically backed up can be selected only when the device set by the "#8919 Auto
backup device" parameter setting is selected.
(1)
(2)
(3)
(5)
Display items
Display item
(1) Device name
(2) Data name
(3) Execution status
(4) Warning message
(5) Backup list
(Note 1) "APLC data" cannot be backed up/restored if the optional "APLC" is disabled.
(Note 2) The "Auto 1 to 3" data display when the device set by the "#8919 Auto backup device" parameter is
selected.
This displays the selected device name.
This displays the data name being backed up/restored.
System data, ladder, and APLC data are displayed.
This displays the processing execution status.
Processing is executed in the system data, ladder, and APLC data order.
(Note 1)
This displays messages at the start and end of backup/restore processing.
This displays the backup date list.
This date is the system data time stamp.
Backup area
Auto 1 Data that was automatically backed up. Display
2 in the backup date descending order. The latest
3 three generations of data are displayed.
Manual Data that was backed up on this screen.
Master data Data that was backed up on this screen.
Generally, this is the factory settings data.
The above data can be selected at restore processing. (Note 2)
257
6.3 All Backup Screen
Details
Explanation
(4)
Backup format
Auto
Manual
Manual