Mitsubishi Electric 700 Series Training Manual page 47

2. Monitor Screens
Menus
Menu
This activates the machine position trace mode. If any program is
currently running, the machine position path is traced from the current
Trace
ON
position. If this menu is pressed during the machine position trace
mode, the trace mode will be turned OFF.
This activates the tool center point trace mode. If any program is
currently running, the path of tool center point machine position path is
traced from the current position. If this menu is pressed during the tool
Tip
traceON
center point trace mode, the trace mode will be turned OFF.
Note that this menu does not appear if the 5-axis related option is
OFF.
This erases the data in graphic drawing area displayed on the screen.
Erase
This changes the graphic drawing display range.
When this menu is pressed, the menu changes to the display range
Display
change menu.
range
When the display range is changed, the graphic data displayed on the
screen is erased.
This changes the drawing plane.
When this menu is pressed, the menu changes to the display mode
change menu.
Display
There are three types of graphic display modes: 1-plane, 2-plane and
mode
3D.
When the drawing plane is changed, the graphic data displayed on
the screen is erased.
This switches the normal display mode and the full-screen display
All
display mode.
This displays the machining program being executed on the graphic
drawing area.
Program
display
This menu can be selected only when the full-screen display mode is
applied.
This sets the viewpoint angle for the
When the viewpoint angle is changed, the graphic data displayed on
Rotate
the screen is erased.
Note that this menu can be used only in the 3D display mode.
The display range (scale and display position) is automatically set
from the machine movable area. The machine movable area is set
Std
with the parameters " #2013 OT- " and " 2014 OT+ " (software limit).
range
When the display range is changed, the graphic data displayed on the
screen is erased.
This closes the pop-up window and quits this function.
Close
Details
3D
display mode.
39
2.5 Trace
Type Reference
B 2.5.1 Displaying the
Machine Position Trace
B 2.5.3 Displaying the Tool
Center Point Trace
C
C 2.5.5 Changing the
Display Range
C 2.5.6 Changing the
Display Mode
B 2.5.8 Switching the
Full-screen Display
Mode
B
C 2.5.7 Changing the
Display Angle
C
C