Copying/Pasting Data - Mitsubishi Electric 700 Series Training Manual

4. Edit Screens

4.2.14 Copying/Pasting Data

Operation method (Copying)
(1) Press the
Line copy menu.
(2) Designate the range to be copied.
(Ex.) From line 8 to line 10
8/10 INPUT
When copying 1 line, it is also possible to
make a selection using the ↑ , ↓
and designate by pressing the
key.
Notes when copying
(1) If INPUT key is input without setting a line No., the line where the cursor is at is copied.
(2) The highlight of the copy target lines disappears when editing operations are resumed.
(3) If the file is edited after the Line copy menu is pressed, the data copied in the line is canceled.
(4) If the last line of the file is the range to be copied, the last line can be designated as "E".
(Example) From 8th line to last line : 8/E
(5) The copied data is maintained while the copy source file is opened even if the display type or editing area
is switched to another one.
(6) Up to100 lines can be copied in mass-editing.
Operation method (Pasting the copied data)
(1) Move the cursor to the line where the data
is to be pasted.
(2) Press the
Line paste
(3) Press the
INPUT key.
(Note 1) With multi-program display type, data can be copied and pasted between both left and right
areas.
(Note 2) Copy/past is not possible in between regular editing and mass-editing.
(Note 3) "Executing" is displayed in flickering during line paste.
keys
INPUT
menu.
159
The menu is highlighted.
The cursor appears at the lower input area.
The background color for the range to be copied turns light
blue.
The menu highlight returns to normal.
The copied data is inserted in the line before the cursor
" "
position, and Editing appears.
The edited machining program is saved to device, and
" "
Editing disappears.
4.2 Program Editing