Setting The Tool Compensation Data - Mitsubishi Electric 700 Series Training Manual

3. Setup Screen

3.2.1 Setting the Tool Compensation Data

Operation method (Setting "10.000" in the length wear data of compensation No. (102))
(1) Press the menu key Offset No.
(2) Designate the Compensation No.
102 INPUT
It is possible to use the ↑ , ↓ ,
keys as well to move the cursor to the
offset No.102.
(3) Use the
the length wear position.
(4) Input the length wear value.
10 INPUT
Settings can be made by pressing the
=INPUT key instead of the
key.
Operation method ("0.012" is calculated and set in the length wear data for compensation number (102).)
(1) Use the same procedure as (1) above to
move the cursor to the compensation No.
102 length wear position.
(2) Enter a value.
0.012 +INPUT
and
key to move the cursor to
INPUT
3.2 Tool Compensation Amount
The set number appears at the top of the area, and the
cursor moves.
The set value displays.
The input value is added to the original value and displays.
[Ex.] 10.012 displays if the original value is 10.000. (10.000
+ 0.012 = 10.012)
91