Program Check (3D) [700 Series Only] - Mitsubishi Electric 700 Series Training Manual

2. Monitor Screens
2.7 Program Check (3D)
Program check (3D) is a function that draws the workpiece shape and tool movement in the cutting process of
the machining program as a solid image without executing automatic operation. The machining program can
be checked with graphic data drawn at a high speed.
The operation searched machining program (MDI program for MDI mode) can be checked.
The Program Check window will not open if no machining program has been searched.
The workpiece shape and tool shape used with this function can be set on the Edit screen.
Refer to section "4.4 Program Check (3D)" for details.
(Note) The program check (3D) function is an additional specification. The graphic check and 3D solid
graphic check options are required.
■ Normal display (full-screen display mode is OFF)
■ Full-screen display (full-screen display mode is ON)
<Drawing area>
<Drawing area>
44
2.7 Program Check (3D)