Mitsubishi Electric 700 Series Training Manual page 131

3. Setup Screen
Operation method (Erasing one line of tool life management data) (L system)
(1) Move the cursor to the line to be erased.
(2) Press the menu Line clear
INPUT keys.
(3) Press the
Y or
Press a key other than
order not to erase the data.
Operation method (Designating and erasing the multiple lines)
(1) Press the menu Line clear .
(2) Set the erasing range by marking the first
and last # Nos. with a "/", and press
INPUT key.
1/5 INPUT
(3) Press the
Y or
Press a key other than
in order not to erase the data.
(Note) If the INPUT key is pressed without setting a # No., the line at the cursor is erased.
Operation method (Registering a group) (L system)
(1)
Press the Group regist
(2) Set the No. of the group to be registered.
25/1/3000 INPUT
(Note 1) If the method and life data are omitted, a new group is created with method = 0 (usage time), and
life data = 0.
(Note 2) An error occurs if the same group No. already exists.
(Note 3) The group is not registered if one of the operations below is performed after registering a new
group No.
• If the application is exited without registering even 1 item of tool life data.
• If the screen is changed to that of other than the group unit display.
• The part system is changed.
and
INPUT key.
Y or INPUT in
INPUT key.
Y or INPUT
menu.
3.5 Tool Life Management
The menu is highlighted.
A message displays confirming whether it is okay to erase
the data.
The background color of the area where the data is erased
changes to light blue.
One line of the selected life management data is erased and
the menu highlight returns to normal.
The next line moves up after erasing.
(L system)
The menu is highlighted.
A message displays confirming whether it is okay to erase
the data.
The background color of the area where the data is erased
changes to light blue.
The tool life data corresponding to the designated # No. is
erased, and the menu highlight returns to normal.
The next line after the erased range moves up.
A new group is created and the life management data
displays containing no data.
123