Mitsubishi Electric 700 Series Training Manual page 46

2. Monitor Screens
Display items
Display item
(1) Counter
(2) Display mode
(3) Trace drawing area
(4) Scale
(5) Machining time display
(6) Input area
(7) Buffer display
Counter display conditions
Machine position trace mode
Tool center point trace mode
The counter of the axis targeted for the trace drawing is displayed. The three axes
which are displayed are set with the parameters.
[Trace]
The machine position is displayed.
[Tip trace]
The machine position of the tool center point is displayed.
The plane currently being drawn is displayed.
This area is used to draw the tool path as graphics.
The zero point to be displayed can be switched between the machine position zero
point and workpiece coordinate position zero point with parameter "#1231 set03".
The display range scale is displayed.
The time required for machining is calculated and displayed. Nothing is displayed
during tracing.
The input area appears when the menu
pressed.
The scale value and display mode are set.
The input area is hidden when the INPUT key is pressed.
This displays the contents of the machining program currently being executed.
The block being executed is highlighted.
5-axis related specifications
disabled
Machine position
-
38
Details
Display range and Display mode are
5-axis related specifications
enabled
Machine position
Machine position of tool center point
2.5 Trace