Copying/Pasting The Tool Compensation Data - Mitsubishi Electric 700 Series Training Manual

3. Setup Screen

3.2.3 Copying/Pasting the Tool Compensation Data

Operation method (Copying/pasting one line of tool compensation data)
(1) Move the cursor to the line to be
copied with the
keys
(2)
Press the Line copy
(3) Move the cursor to the line (compensation
No.: 109) where the data is to be pasted.
(4)
Press the Line paste
(Note 1) If the compensation data for the copied line is changed after the menu Line copy is pressed,
the data prior to the change is written when pasted.
(Note 2) When copied at Type III, it is not possible to paste the data to a different display (wear data, tool
length data, tool nose data).
, ,
↑ ↓ and
menu.
menu.
3.2 Tool Compensation Amount
The background color of the copied data changes to light
blue.
The copied compensation data is written in the line where
the cursor is.
The background color returns to normal.
The copied compensation data is held until another line is
copied.
93