4. Edit Screens
4.4.7 Performing an Interference Check
If the tool and workpiece contact when performing rapid traverse (G0) movement, the contact location is
drawn in a color highlighting the interference.
Operation method
(1) Press the menu Colli check .
(2) Press the menu Check step
Check continu .
The menu is highlighted.
A program check is performed, and a solid drawing of the
or
workpiece shape and tool movement during the cutting
process is performed.
A " Checking " message is displayed and the menu
Check step
The workpiece and tool contact, this is drawn in a color
highlighting the interference.
181
4.4 Program Check (3D)
or Check continu key is highlighted.