Mitsubishi Electric 700 Series Training Manual page 175

4. Edit Screens
(6) Press the Check continu key.
A block stoppage occurs when performing
a program check if the Check continu
or Check step keys are pressed while
performing a continuous check.
Furthermore, the program check is
restarted if the Check continu key is
pressed during the block stoppage.
The program check is reset if the
Check reset key is pressed while
performing a continuous check.
4.3 Program Check (2D)
A program check is executed and that path is drawn.
A " Checking " message appears and the menu is highlighted.
The check counter display is updated.
The check G modal does not display.
The machining time is updated.
A " Program check completed " message appears when the
continuous check is completed.
The Check continu menu highlight returns to normal.
167