Executing Restart Search (Restart Type 2) - Mitsubishi Electric 700 Series Training Manual

2. Monitor Screens

2.3.3 Executing Restart Search (Restart Type 2)

If a machining program differing from the machining program to be restarted was run with tape, memory or HD
operation before starting restart search, restart the respective machining program with restart type 2.
The restart type 2 operation sequence is the same as restart type 1, but necessary matters for starting the
machining program, such as setting the coordinate system, must be completed before starting restart search.
When the parameter "#8914 Auto Top search" is "0", execute the top search for the machining program.
Operation method (When the parameter "#8914 Auto Top search" is "0")
(Example) When restarting from subprogram O123 N6 B2 called from main program O1000
(1) Turn the power ON, and return all axes to
the reference position.
(2) In the MDI mode, set the coordinate
system to be used when starting the
program to be restarted.
(3) Move each axis to the program restart
position.
(4) When using tape operation, index the top
of the tape.
(5) Press the main menu Restart search .
(6) Press the Type 2.
(7) Press the sub-menu Top search .
(8) Using the ↑ , ↓ ,
cursor to the target machining program.
(9) Press the INPUT key.
The search can be executed by pressing
the menu Search exec
INPUT key.
and keys, move the
instead of the
The submenu appears.
The main screen for restart search appears as a pop-up
window.
The window for top search appears as a pop-up window.
Set the cursor to 1000.
The top search starts.
When the top search is completed, the message "Search
Complete" appears.
The top search pop-up window closes, and the main screen
for restart search appears as a pop-up window.
32
2.3 Restart Search