Rewriting Data - Mitsubishi Electric 700 Series Training Manual

4. Edit Screens

4.2.9 Rewriting Data

Operation method
(1) Move the cursor to the position of the data
to be rewritten.
The cursor can be moved to one place to
the right of EOB (;).
(2) Set the data.
(3) When one line of setting is completed,
press the INPUT
(Note 1) Up to 255 characters can be input in one block in regular editing and 127 characters in mass-
editing.
(Note 2) When the cursor is on or one place to the right of EOB ( ; ), input data is inserted even if not in
input mode (refer to "4.2.10 Inserting Data".)
(Note 3) When changing to another function such as the program check, or to another screen such as
the operation screen when " Editing " displays, the operation message "Save current file? (Y/N)"
displays. If N key is pressed changing to the other screen once, and the Edit screen is
selected again, the program before editing operation will be displayed. (Edited contents will be
invalid.)
(Note 4) "Saving" is displayed in flickering during saving.
key.
" "
The message Editing
The data is set from the position of the cursor. Data at the
area is overwritten.
The cursor moves one space (character) at a time to the
right as the data is set.
EOB ( ; ) is added to the set data and the data is fixed.
When newly creating data, the cursor moves to the head of
the next line.
When changing existing data, etc., the cursor does not
move.
153
4.2 Program Editing
appears when setting is started.