2. Monitor Screens
2.5.1 Displaying the Machine Position Trace
Operation method
(1) Press the MONITOR key
(2)
Press SEARCH for machining program
(3)
Press the main menu Trace ON .
(4)
Press CYCLE START button.
•
The Trace ON menu is highlighted.
If Tip TraceON is highlighted, unhighlight it.
The machine position appears in the drawing area as a
•
tool mark.
•
The machine position counter is displayed at the counter.
The message "Tracing" appears.
•
After this, the machine position path is drawn with graphics in
the machine position trace mode.
(Note) If graphic check (2D) is executed, the "Trace ON"
status is cancelled.
The machine position path is drawn with graphics.
The machine position path is drawn with a solid green line.
40
2.5 Trace