Buffer Correction - Mitsubishi Electric 700 Series Training Manual

2. Monitor Screens
2.19 Buffer Correction PRG Modification
During automatic operation (Memory, HD, FLD, DS, memory card) or MDI operation, a block stop can be
applied, and the next command can be corrected or changed.
When a program error occurs, the block in which the error occurred can be corrected without resetting the NC,
and operation can be continued.
Memory
HD
Memory
card
DS
FLD
MDI
(1) The next command can be corrected in the following two cases.
• When single block stop is applied, and there is a command block to be corrected in the next command.
• When there is an error (program error) in the next command and automatic operation is stopped.
(2) Not only the displayed buffer data but also the contents in the device are corrected with the buffer
corrections. (The corrected data is reflected.)
(3) Several blocks following the next command can be corrected simultaneously.
Menus
Menu
This closes the pop-up window and quits this function.
Close
Preread
Execution
block
block

Buffer correction

Details
72
2.19 Buffer Correction
Machine
NC operation
control
Type
C
Reference