Restart Search; Main Screen - Mitsubishi Electric 700 Series Training Manual

2. Monitor Screens

2.3 Restart Search

If machining is temporarily stopped due to tool breakage, etc., the program restart function searches for the
block of the machining program to be restarted, and restarts machining from that block.
There are two types of restart, type 1 and type 2.
Restart method
Restart type 1
Restart type 2

2.3.1 Main Screen

The type 1 and type 2 restart search can be executed from the Main screen.
(1)
(2)
(3)
(4)
(5)
(6)
Display items
Display item
(1) Device and directory
display
(2) Research position
(3) Restart type
(4) Position when restart
search is completed
(5) Remaining distance when
restart search is
completed
(6) Input area
After machining is reset due to a tool breakage, etc., machining is restarted from the designated
sequence number and/or block number.
After machining program is stopped due to a holiday, etc., and the power is turned OFF and ON,
machining is restarted from the designated sequence number and/or block number.
This displays the device and directory where the searched machining program is
located.
This displays the researched main program position (program No., sequence No.,
block No.).
This displays the restart search type.
This displays the position on the local coordinate system when the restart search is
completed.
This displays the remaining distance when the restart search is completed.
This displays the input key details.
Details
Details
29
2.3 Restart Search