Mitsubishi Electric 700 Series Training Manual page 32

2. Monitor Screens
Display item
(11) Machining program
currently being executed
(Note)
Main 010...
Sub 01234...
(12) Buffer display
(Note) If the program No. (program name) exceeds 12 characters, "*" will appear at the 12th character.
Menus
Menu
This executes operation search.
This executes restart search.
This edits the machining program in search.
This executes trace.
This checks the program.
This menu does not appear if the program check function option is not
provided.
This enlarges the counter, and displays the counters for all axes.
This displays the tool compensation amount.
A value can also be set for the tool compensation amount.
This displays the workpiece coordinate system offset.
A value can also be set for the workpiece coordinate system offset.
A arbitrary value can be set in the relative position counter.
This executes a manual numerical value command.
This displays the program No., sequence No. and block No. currently being executed.
When a subprogram is being executed, this displays the subprogram's program No.,
sequence No. and block No.
This displays the contents of the machining program currently being executed.
The block being executed is highlighted.
Details
24
2.1 Screen Configuration
Details
Type
2.2 Operation Search
2.3 Restart Search
2.4 Program Edit
2.5 Trace
2.6 Program Check (2D)
2.7 Program Check (3D)
2.8 Counter All-axis
Display
2.9 Tool Offset Amount
2.10 Workpiece
Coordinate System
Offset
2.11 Counter Set
2.13 Manual Numerical
Value Command
Reference