Mitsubishi Electric 700 Series Training Manual page 184

4. Edit Screens
Display item
(3) Machining time display
(4) Check G modal display
(5) Currently executed
machining program
Main O10 ...
O1234 ...
Sub
(6) Buffer display
This calculates and displays the time taken for machining.
This displays the following modals:
• Absolute/incremental (G90, G91: Group 3)
• Operation mode (G00, G01, G02, G03 etc.: Group 1)
• Tool radius compensation (G40, G41, G42: Group 7)
• Fixed cycle (G80, G81 etc.: Group 9)
This displays the device name, program No., sequence No., and block No. currently
being executed.
When sub-program is being executed, the sub-program device name, program No.,
sequence No., and block No. are displayed.
This displays the contents of the machining program currently being executed.
The block being executed is highlighted.
176
4.4 Program Check (3D)
Details